DMF 260|11 (Reference-Nr. 030318)

Richiesta per questa macchina

Prezzo in EUR:Asking price

Numero di riferimento 030318
Anno di costruzione 2023
Ore di servizio nessuna informazione
Offerente

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
Categoria principale
Macchine per la lavorazione dei metalli
Categoria
Macchine per la fresatura
Tipo di macchina
Fresatrici a banco con supporto regolabile
Produttore
DMG MORI
Comando
Siemens

Descrizione

General
in travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate
Tool changer
Type of gripper	Double gripper
Type of magazine	Chain
Number of tools	60
Max. tool weight	12 Kg
Max. tool length	500 mm
Max. tool diameter with occupied adjacent pockets	115 mm
Max. tool dia. with free neighbouring pockets	160 mm
Technical Data
Feed rate longitudinal/transverse/vertical	80000/80000/80000 mm/min
Rapid traverse longitudinal/transverse/vertical	80/80/80 m/min
Working area 1
Longitudinal	2600 mm
Cross	1100 mm
Vertical	900 mm

Specificazione

Direct measuring system	Direct path measuring system
Cabine	Full protection cabin
Dynamic package for DMF 260 linear (Y1100)	Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/19.68 ft/s² Active chiller for main spindle and Linear motor mag
Rigid table with integrated rotary axis (leftside)	Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position
	Table surface 3200 x 1100 (Ø 1050) mm
Clamping hydraulics,2 circuits,Rigid-/Round table	Clamping hydraulic for rigid/integrated round table, 30-240 Bar, 2 circuits
	Rotation speed max.4. Axis 50 rpm
	Distance between T-Slots 100 mm
	Number of Slots 11
	Slot width 18 mm
Removable partition wall DMF260 (Y1100)	Partition wall removable for pendulum machining DMF260, 2 working spaces (possible with integrated round table)
Tool magazine 60 places SK50/HSK-A100	Tool magazine 60 places SK50/HSK-A100 Chain type with double gripper
Mechanical setup station	Mechanical setup station SK50/HSK-A100
Load support for tool magazine	Load support for tool magazine SK50/HSK-A100 with 2 pockets at the stairs to magazine
Spindle speed 20 - 10,000 rpm HSK-A100 430 Nm	Spindle speed 20 - 10,000 rpm HSK-A100 for tool taper according to DIN69893 with power 52/42 kW // 69.7/56.3 hp with torque 430/300 Nm (40/100% ED) (differently from standard)
3D quickSET elevated constructuion	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
Tool laser measuring Blum	Laser tool measuring Blum (not with TT 140 possible, for pendulum machining please order 2 pieces)
Oil mist separator	Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
Signal lamp 4-colour	Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air, low oil rate possible
Internal Coolant Supply 80bar/980l frequency controled	Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
Chip flushing for working area	Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included
Double cartridge filter,25 µm	Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant)
Coolant tempering for internal coolant 980l	Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l)
Door drive for working area doors	Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
proTIME	proTIME Visualisation of remaining runtime, remaining workpieces and the machine state
Application Tuning Cycle ATC	Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
Turning/Milling cycle	Turning / milling cycle For the machining of internal and external diameter using spindle orientation
DXF Reader	DXF-Raeder: Open CAD files Extracting of counters and drilling positions directly in G-code and ShopMill programs Supported elements: drilling positions and contours
angularTOOL	angular TOOL Technology cycle for programming of a 360 degree rotatable angular head tool
Laminated safety glass	Laminated safety glass for Windows in the two front doors
Exhibition design DMF	Exhibition design DMF chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; paper version of electrical plan
Stop block HSK-100/SK50/CAT50	Stop block HSK-A100/SK50/CAT50
Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
Service Agent	Service Agent Overview of all maintenance work on the machine
Special equipment	SK001 Preparation for Hofmann RW/NC 400 with direct measuring system ready to plug right workspace Y-0404 Micro-Aerator: For clean coolant (50HZ)